Automatic Meter Reading (AMR)
Automated Meter Reading (AMR) relates to the use of a device which communicates resource consumption information (normally energy, gas or water) measured by a meter to a supplier. It is normally one directional, in that the meter communicates only for example with an energy supplier, say once a month reporting the amount of energy being used.
These devices avoid manual reading which can be time-consuming, unreliable or difficult to achieve, if for example water meters are located in difficult to access areas, or occupants are unavailable to give access. AMRs can normally be installed alongside existing meters, rather than requiring a new meter entirely, communicating measurements, potentially without an Internet connection.
Advanced Meter Integration (AMI) describes a smarter system that relies on a newer smarter meters to replace existing ones. These communicate data in real-time to whatever specification is required. This is the precursor to what we commonly now call the smart meter, which can be a two way device, most commonly used to measure, assess and track commercial or residential energy use. Some AMRs today however have similar functionalities as smart meters.
The AMR was first patented in 1974 by T.Paraskevakos who developed radio based fire, security and medical alarm systems for Boeing before the internet enabled wi-fi accessible devices. The first commercially available system was launched in 1977 by Metretek.
AMR's, AMI and smart meters are often key components in Measurement and Verification (M&V) of resource (especially energy) consumption for individual buildings or facilities and in the implementation, testing and assessment of Energy Conservation Measures (ECMs) of those facilities.
[edit] Related articles on Designing Buildings
Featured articles and news
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.